Mitsubishi Heavy Industries SRK20ZIX-S User Manual download pdf (Page 7)

–6–

Remote control handling

Replacing the batteries

The following cases signify exhausted batteries. Replace old batteries with new ones.

• Receiving beep is not emitted when a signal is transmitted.

• Display fades away.

NOTE

• Do not use old and new batteries together.

• Remove the batteries when the remote control is not used for a long period.

• The recommended effective period of a battery conforming to JIS or IEC should be

6 to 12 months with normal use. If used longer, or when an unspecified battery is

used, liquid may leak from the battery, causing the remote control to malfunction.

• The recommendable effective period is printed on the battery. This may be shorter

due to manufacturering time to the unit. However, the battery may still be in

working order after expiry of its nominal life.

Pull out the cover and take out

old batteries.

Insert new batteries.

R03 (AAA, Micro) x2

Close the cover.

■ When the display shows any abnormal condition, Press the ACL switch with

the tip of a ballpoint pen.

Pay attention to

the ª and ·

marks

Press the ACL switch with the

tip of a ballpoint pen.

The timer setting mode is displayed.

Page 7

Using the remote control holder

The remote control can be attached to a wall or pillar by

using a remote control holder. Before installing the remote

control, check that the air-conditioner receives the signals

properly.

For installing or removing the remote control, move it up or

down in the holder.

• Are the batteries running down?

“Replacing the batteries” above.

Replace the batteries with new ones and retry the operation.

Warning note for remote control handling

Operation failure with the remote control

• If the operation fails, operate the unit with

temporary operation function.

Contact your dealer to have the remote control

checked.

Below

Strictly prohibited

• Do not drop the remote control.

Handle with care.

• Do not go near high temperature

places, such as an electric carpet

or stove.

• Do not place heavy objects on the

remote control, or step on it.

• Do not put any obstructing obsta-

cles between the remote control

and the unit.

• Do not spill any liquid on the

remote control.

• Do not leave the remote control ex-

posed to direct sunlight or other

strong lighting.

Temporary run operation

• The unit ON/OFF button on the unit operates ON/OFF temporarily when the remote control is not used.

Operation program

• OPERATION MODE : AUTO

• FAN SPEED : AUTO

• AIR FLOW : AUTO

• Operation starts by pressing the unit ON/OFF button; it stops if you press

the button again.

Unit ON/OFF button

• Do not hold the Unit ON/OFF button down for more than 5 seconds.

(Holding it down longer than 5 seconds sets the automatic cooling used during servicing or when relocating the air-conditioner.)

NOTE

Downloaded from AC-Manual.com Manuals

1 2 3 4 5 6 7 8 9 10 11 12 ... 23 24

Comments to this Manuals

No comments

Mitsubishi Heavy Industries SRK20ZIX-S User Manual Page 7

Comments to this Manuals

Related products and manuals for Split-system air conditioners Mitsubishi Heavy Industries SRK20ZIX-S